HKS
46 EUR
In stock
- Fits HKS Hi-Power exhaust systems with 94 mm exhaust tip
- Constructed from SUS304 stainless steel
19 EUR
5-10 business days
- Supplied as a 2-pack
- Approximately 76 mm gasket diameter
- Fits compatible 75 mm (3-inch) exhaust systems
94 EUR
5-10 business days
- Manufactured from lightweight, high-strength duralumin
- Precision CNC-machined construction
- Corrosion and wear-resistant surface
32 EUR
5-10 business days
- Rated at 108 kPa (1.1 bar) opening pressure.
- High-quality silicone rubber seal for a secure, leak-resistant fit.
177 EUR
5-10 business days
- Adjustable cam gear for precise camshaft timing adjustment
- Manufactured from lightweight, high-strength anodized duralumin
- Optimizes horsepower, torque, and throttle response
173 EUR
5-10 business days
- Belt strength has been optimized for RB20/RB25/RB26
- Teeth rubber is made from H-NBR grade rubber for additional strength
152 EUR
5-10 business days
- Raises the factory fuel cut limit
- Allows higher boost levels without triggering fuel cut
- Helps eliminate hesitation and power loss under boost
29 EUR
5-10 business days
- Designed for 150 mm HKS Super Power Flow filter assemblies
- 2-layer wet filter construction
- Contributes to quicker throttle response and improved engine performance
604 EUR
5-10 business days
- HKS Power Editor vehicle-specific boost controller
- Improved engine performance, increased torque, and quicker throttle response
- Includes a bypass connector for easy return to the factory signal configuration
2399 EUR
5-10 business days
- Optimized exhaust flow with reduced back pressure
- Improved throttle response and a broader, more usable powerband
- Distinctive, crisp, and sporty exhaust note under acceleration
19 EUR
5-10 business days
- Supplied as a 2-pack
- Compatible 60 mm exhaust systems and flange connections
- Helps create a secure seal between exhaust flanges
240 EUR
5-10 business days
- Provides improved airflow and reduced intake restriction
- Contributes to quicker throttle response, improved engine performance, and enhanced power delivery
- Produces a sporty induction sound
36 EUR
5-10 business days
- Designed for 200 mm HKS Super Power Flow filter assemblies
- 3-layer dry filter construction
- Provides improved airflow and quicker throttle response
240 EUR
5-10 business days
- Provides improved airflow and reduced intake restriction
- Contributes to quicker throttle response, improved engine performance, and enhanced power delivery
- Produces a sporty induction sound and a more pronounced turbocharger sound
240 EUR
5-10 business days
- Provides improved airflow and reduced intake restriction
- Contributes to quicker throttle response, improved engine performance, and enhanced power delivery
- Produces a sporty induction sound
1391 EUR
5-10 business days
- Approximately 200% greater cooling surface area than the factory intercooler.
- Integrated inlet tank and piping design for improved airflow.
- Reduces intake air temperatures and minimizes pressure loss.
152 EUR
5-10 business days
- Eliminates the factory speed limiter
- Designed for motorsport and track use
- Unlocks the vehicle's full performance potential
177 EUR
5-10 business days
- Manufactured from lightweight, high-strength A2014 duralumin
- Reduces rotating mass and engine load
- Allows precise exhaust camshaft timing adjustment
288 EUR
5-10 business days
- Sequential dual-valve system for fast and controlled boost pressure release
- Helps reduce compressor surge and minimise stress on the turbocharger
- Produces the signature HKS blow-off valve sound when configured for atmospheric venting
46 EUR
5-10 business days
- Constructed from SUS304 stainless steel
- Fits HKS Hi-Power exhaust systems with 120 mm exhaust tip
604 EUR
5-10 business days
- Optimized for improved exhaust flow and turbo response
- Increases high-RPM power
- Enhances low- and mid-range response
461 EUR
5-10 business days
- Sequential dual-valve system for rapid and controlled boost pressure release
- HKS differential pressure control for stable performance across a wide range of boost pressures
- Pull-type valve design helps keep the valve securely sealed under boost
- Produces the signature HKS blow-off valve sound
182 EUR
5-10 business days
- Teeth rubber is made from H-NBR grade rubber for additional strength
211 EUR
5-10 business days
- Teeth rubber is made from H-NBR grade rubber for additional strength
413 EUR
5-10 business days
- Sequential dual-valve system with primary and secondary valves
- Die-cast aluminium body with a premium finish
- Supplied with the Triple Fin insert for the signature HKS blow-off valve sound
2111 EUR
5-10 business days
- Improved exhaust flow while maintaining emissions performance
- Preserves the distinctive Subaru boxer engine sound
- Manufactured from SUS304 stainless steel
211 EUR
5-10 business days
- Teeth rubber is made from H-NBR grade rubber for additional strength
- Perfect for use with HKS Slide Cam-Pulleys for high power/high RPM engine
177 EUR
5-10 business days
- Manufactured from lightweight, high-strength A2014 duralumin
- Approximately 10% lighter to reduce rotating mass and engine load
- Allows precise exhaust camshaft timing adjustment
53 EUR
5-10 business days
- Installs into the factory airbox with no modifications required
- Manufactured from dry, non-woven filtration material
- Provides improved airflow and reduced intake restriction
604 EUR
5-10 business days
- Compatible with the factory valvetrain
- Improves intake airflow, throttle response, and mid-range torque
- Perfect for street and mild track applications
365 EUR
5-10 business days
- Step 1 exhaust camshaft
- CAD-designed profile optimized for increased horsepower and torque
- Improves exhaust flow and overall engine performance
700 EUR
5-10 business days
- Provides improved airflow and reduced intake restriction
- Contributes to quicker throttle response, improved engine performance, and enhanced power delivery
- Produces a sporty induction sound, particularly after the VTEC crossover
604 EUR
5-10 business days
- Improves intake airflow and top-end power
- Optimized for high-RPM performance
- Requires upgraded valve springs
240 EUR
5-10 business days
- Adjustable cam gear for precise camshaft timing adjustment
- Manufactured from lightweight, high-strength duralumin
- Laser-etched timing degree markings for accurate adjustment
139 EUR
5-10 business days
- Contributes to quicker throttle response and improved engine performance
- Large filter surface area for high airflow capacity
- Produces a sporty induction sound
556 EUR
5-10 business days
- Improves torque, throttle response, and engine performance
- Precision-machined billet construction for maximum durability
- Compatible with Nissan Variable Camshaft System (NVCS)
62 EUR
5-10 business days
- Teeth rubber is made from H-NBR grade rubber for additional strength
413 EUR
5-10 business days
- Helps reduce compressor surge and minimise stress on the turbocharger
- Silver-finished die-cast aluminium valve body
- Triple-fin insert produces the signature HKS blow-off valve sound
139 EUR
5-10 business days
- Contributes to quicker throttle response and improved engine performance
- Large filter surface area for high airflow capacity
- Produces a sporty induction sound
240 EUR
5-10 business days
- Provides improved airflow and reduced intake restriction
- Contributes to quicker throttle response, improved engine performance, and enhanced power delivery
- Produces a sporty induction sound and a more pronounced turbocharger sound
2015 EUR
5-10 business days
- Lightweight construction manufactured from high-quality stainless steel
- Improved throttle response and more efficient cylinder scavenging
- Deep, sporty exhaust note with minimal cabin drone during everyday driving
413 EUR
5-10 business days
- Sequential dual-valve system for rapid and controlled boost pressure release
- Produces the signature HKS blow-off valve sound
- Differential pressure control for stable performance across a wide range of boost pressures
413 EUR
5-10 business days
- Sequential dual-valve system for rapid and controlled boost pressure release
- Helps reduce compressor surge and minimise stress on the turbochargers
- Triple-fin insert produces the signature HKS blow-off valve sound
508 EUR
5-10 business days
- Provides improved airflow and reduced intake restriction
- Contributes to quicker throttle response, improved engine performance, and enhanced power delivery
- Produces a sporty induction sound
41 EUR
5-10 business days
- Fits HKS Drager and other compatible exhaust systems with a 120 mm exhaust tip
- Reduces exhaust noise for street and track use
- Retains a sporty exhaust note while reducing overall noise
1199 EUR
5-10 business days
- Manufactured from high-strength cast aluminum
- Honeycomb-reinforced design increases transmission case rigidity
- Reduces stress on bearings, shafts, and gear teeth
1247 EUR
5-10 business days
- Manufactured from SUS304 stainless steel
- Improved throttle response, more efficient cylinder scavenging, and a broader, more usable powerband
- Deep, sporty exhaust note
240 EUR
5-10 business days
- Belt strength has been optimized for 4G63
- Teeth rubber is made from H-NBR grade rubber for additional strength
182 EUR
5-10 business days
- Teeth rubber is made from H-NBR grade rubber for additional strength
177 EUR
5-10 business days
- Manufactured from lightweight, high-strength A2014 duralumin
- Approximately 10% lighter to reduce rotating mass and engine load
- Compatible with both factory and aftermarket camshafts
2207 EUR
5-10 business days
- Cat-back exhaust system with improved airflow and reduced back pressure
- Helps provide improved engine performance and quicker throttle response
- Deep exhaust note under acceleration with reduced cabin resonance during normal driving
240 EUR
5-10 business days
- Provides improved airflow and reduced intake restriction
- Contributes to quicker throttle response, improved engine performance, and enhanced power delivery
- Produces a sporty induction sound and a more pronounced turbocharger sound
1295 EUR
5-10 business days
- Manufactured entirely from SUS304 stainless steel
- Improved throttle response, more efficient cylinder scavenging, increased engine output, and a broader, more usable powerband
- Deep, sporty exhaust note
48 EUR
5-10 business days
- Better durability and performance in hotter or colder conditions with improved friction tolerance
- Much lighter than previous version of belt
192 EUR
5-10 business days
- Adjustable cam gear for precise camshaft timing adjustment
- Manufactured from lightweight, heat-treated duralumin
- Reduces rotating mass for improved engine response
19 EUR
5-10 business days
- Supplied as a 2-pack
- Compatible 65 mm exhaust systems and flange connections
- Helps create a secure seal between exhaust flanges
36 EUR
5-10 business days
- Designed for 200 mm HKS Super Power Flow filter assemblies
- 2-layer wet filter construction
- Contributes to quicker throttle response and improved engine performance
123 EUR
5-10 business days
- Better durability and performance in hotter or colder conditions with improved friction tolerance
- Much lighter than previous version of belt
72 EUR
5-10 business days
- Better durability in both hot and cold temperatures
556 EUR
5-10 business days
- Improves exhaust flow and turbo response
- Increases engine performance and throttle response
- Fits Nissan RB25DET R33 with NVCS
48 EUR
5-10 business days
- Better durability and performance in hotter or colder conditions with improved friction tolerance
- Much lighter than previous version of belt