Tuning Parts for Acura RSX 2002-2006

Seat Pressure: 62 lbs at 1.975” - Open Pressure: 220 lbs at 1.100” - Coil Bind: 1.000” Must Use Skunk2 PN 312-05-0010 (Spring Bases) to Install Dual Springs in Single Spring K Series Heads

IN: 0.512"" / 272@1mm; EX: 0.496"" / 276@1mm

70mm T/ Body Opening - 76mm MAX Ported - PRB T/ Body Bolt Pattern

Ultra Race Side Feed Plenum - 3.5L Volume - 90mm Inlet, 5.0 Ford T/ Body Bolt Pattern (4.25"" Square Bolt Spacing)

IN: 0.495"" / 261@1mm; EX: 0.470"" / 260@1mm

Allows Installation of B Series Throttle Body to a Manifold Using Honda RBC Bolt Pattern - 68mm on B Series Side

Improve your cars cooling performance with parts from CSF.

Set of 4 Bosch EV14 1500cc injectors for Honda S2000 F22 06-09, CRZ 2011-2015, Civic Si K20/K24 02-15, Acura RSX/TSX K20/K24 02-08 Alternative for 21U-01-1300-4

Titainium Retainer w/ 7° Keeper Seat - Seat Pressure: 60 lbs at 1.600” - Open Pressure: 220 lbs at 1.100” - Coil Bind: 1.000” Must Use Skunk2 PN 312-05-0010 (Spring Bases) to Install Dual Springs in Single Spring K Series Heads - Must Use Skunk2 PN 312-05-0010 (Keepers/Locks) on 2005+ K Series Engines

K&N Typhoon® air intake systems are built for performance and show. This free-flowing mandrel-bent aluminum tube induction system was designed to fit many sport compact performance vehicles. Typhoon air intakes come with a high-flow conical air filter designed to provide increased surface area and dust capacity. Some Typhoon air intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N air intake product page for specific CARB status.

Acura RSX Racing Thermostat, 2002-2006

Allows Installation of K Series TPS to B Series Throttle Body

Ultra Race Intake Manifold Plenum Gasket - Use Between Plenum and Plenum Base Adapter or Between Spacers

Set of 4 Bosch EV14 1200ccnjectors for Honda S2000 F22 06-09, CRZ 2011-2015, Civic Si K20, K24 02-15, Acura RSX/TSX K20/K24 02-08 Alternative for 21U-01-1300-4

Allows Installation of PRB Pattern K Throttle Body to a Manifold Using Early Ford 5.0L Bolt Pattern - 74mm on K Series Side

Black Series - Ultra Race Side Feed Plenum - 3.5L Volume - 90mm Inlet, 5.0 Ford T/ Body Bolt Pattern (4.25"" Square Bolt Spacing)

Ultra Race Intake Manifold Plenum Base Adapter Gasket - Use Between Plenum Base Adapter and Runners

Set of 4 1000cc Bosch EV14 Injectors for Honda S2000 F22 06-09, CRZ 2011-2015, Civic Si K20/K24 02-15, Acura RSX/TSX K20/K24 02-08

Clear - Ultra Race 2.0 Liter Plenum Spacer - Includes Gaskets

IN: 0.640"" / 278@1mm; EX: 0.580"" / 289@1mm - 1 Lobe Forged Tool Steel Core

Supports Up To 1200HP - 8 AN ORB Inlet / Outlet - Composite - For Use w/ Remote Mount Fuel Pressure Regulator

Black VTEC Solenoid Cover for Honda’s B & D serie engines. Fits OEM solenoid.

A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque.

4340 Chromoly, X-Beam Design w/ 3/8"" ARP2000 Bolts - 152.00mm Length w/ OEM Journal Width - Rated to 700hp

Chromoly Spring Base w/ .440"" ID Spring Step - Use on K Series Engines Originally Equipped w/ Single Valve Springs

IN: 0.531"" / 266@1mm; EX: 0.492"" / 262@1mm

IN: 0.580"" / 275@1mm; EX: 0.565"" / 277@1mm - 3 Lobe Forged Tool Steel Core

Invidia Exhaust delivers high quality systems for your car. For better performance and sound!

Set of 16

IN: 0.551"" / 276@1mm; EX: 0.512"" / 282@1mm