2 - Tuning Parts for Acura RSX 2002-2006

Allows Installation of RBC Pattern K Throttle Body to a Manifold Using Early Ford 5.0L Bolt Pattern - 72mm on K Series Side

Upper And Lower Hose Only - 1.25"" Diameter

Exhaust Gear Only.

Dish Face - Intake: 35mm x 108.85mm x 5.48mm; Exhaust: 29mm x 108.85mm x 5.45mm - PVD Chromium Nitride Coated

Seat Pressure: 100 lbs at 1.600” - Open Pressure: 255 lbs at 1.100” - Coil Bind: .890” - Max Lift: .680” Must Use Skunk2 PN 312-05-0010 (Spring Bases) to Install Dual Springs in Single Spring K Series Heads or Install K Valve Springs in F20C/F22C Engines

Ultra Race Center Feed Plenum - 5.0L Volume - 90mm Inlet, 5.0 Ford T/ Body Bolt Pattern (4.25"" Square Bolt Spacing)

These mounts are made out of high grade billet aluminum material and steel. The mounts feature 70 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking.

Titainium - 42% Lighter than OEM Steel Retainers - 7° Keeper Seat - Pair with Alpha Series or Pro Series Valve Springs - Must Use Skunk2 P/N 312-05-0010 on 2005+ K Series Engines

Direct Replacement For OEM Intake Manifold Gasket

High performance radiators from Japanese Koyorad for those with high requirements from their cooling system

Allows Installation of RBC Pattern K Throttle Body to a Manifold Using Honda PRB Bolt Pattern - 72mm on K Series Side

K&N Typhoon® air intake systems are built for performance and show. This free-flowing mandrel-bent aluminum tube induction system was designed to fit many sport compact performance vehicles. Typhoon air intakes come with a high-flow conical air filter designed to provide increased surface area and dust capacity. Some Typhoon air intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N air intake product page for specific CARB status.

These mounts are made out of high grade billet aluminum material and steel. The mounts feature 70 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking.

IN: 0.620"" / 284@1mm; EX: 0.580"" / 284@1mm - 1 Lobe Forged Tool Steel Core

Direct Replacement or Oversize Throttle Body Gasket.

92-Up B Series - Fits Over OEM Solenoid - Skunk2 Inside

DW65C series, 265lph compact fuel pump without mounting clips w /install kit for RSX 02-06,Civic 01-05, MX5 2006-2015

Clear - Ultra Race 1.0 Liter Plenum Spacer - Includes Gaskets

5.472 length for 22mm/.866 wrist pin diam

Provides power gains while maintaining A/F ratios with no additional tuning

Intake/ Exhaust Set. Pro Series Cam Gear Set for Honda's K20/ K24 engines.

IN: 0.540"" / 264@1mm; EX: 0.530"" / 264@1mm - 3 Lobe Forged Tool Steel Core

Allows Installation of B Series Throttle Body to a Manifold Using Early Ford 5.0L Bolt Pattern - 74mm on B Series Side

32pc. 7° Chromoly Locks for 5.5mm Valve Stem

High Pressure Radiator Cap Type B Fits Hondas, Acura, Scion, and Toyota (Excludes 88-91 Civic, Acura Integra 1990-1993, and 92-01 Preludes)

Black - Ultra Race 1.0 Liter Plenum Spacer - Includes Gaskets

Set of 16

With Torque Solution engine mounts you will see and feel a difference in your vehicle. These mounts are made out of high grade billet aluminum material and steel. The mounts feature 70 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking.

Black Powder Coated Mild-Steel w/ CNC Laser Cut Skunk2 Logo - Includes Contrast Insert

DW300C series, 340lph compact fuel pump without mounting clips w /Install Kit for RSX 02-06,Civic 01-05, MX5 2006-2015