+
Horsepower
+
Newton meter
CP Pistons

Subaru EJ25 DOHC Pistons

Article nr:
SC7410
|
(0 reviews)
Bore: 3.957 (100.5mm) CR: 8,5:1 Size: +0.5mm Stroke: 79 Rod Length: 131,25 CH: 1,193 Pin Size: 23
1098 EUR
Delivery:  Out of stock
Warehouse stock:  0
Stock: 0
 
Sales Representative Image

Talk to an expert

Need help? Check fitment, get personalized recommendations and tips.

Contact us

  • Product description
  • CP has built a reputation of high end quality pistons, build to perform and out last; especially in powersport and sport compact. We are recognized as a technological leader in piston design and development for all venues for motorsports. We focus on providing industry-leading products and performance while maintaining the highest level of customer service. Proudly made in USA.

    Product video

    Technical specification

    Article nr:
    SC7410
    Manufacture Partnumber: SC7410-4
    Size: +0.5mm
    Bore Diameter: 100.0mm
    Compatible with naturally aspirated?: No
    Compatible with nitrous oxide?: Yes
    Compatible with turbo or supercharger?: Yes
    Compression Height: 30.3mm
    Compression Ratio: 8.5:1
    Piston Volume: -21.8
    Rod Length: 131.25mm
    Stroke: 79mm
    Wrist Pin Diameter: 23mm
  • Suitable for
  • Subaru EJ25 DOHC
  • Brand
  • CP Pistons

    CP-Carillo is a well-known brand in racing circles and among engine builders. This is a brand that has been around since 1963 and has since made an incredible journey. Over the years, the company has produced an incredibly wide range of forged pistons, connecting rods, stroker kits, piston rings, piston bolts, etc.

    CP Pistons has built a reputation for manufacturing the best pistons in the sport compact market. They are recognized as technological leaders and developers in motorsport. Their focus is to deliver the best pistons and at the same time have the best customer support!

    What should you consider when buying pistons?

    The thing to think about is what kind of engine to build. Should it be a turbo engine or a naturally aspirated engine? Should it run on ethanol or gasoline? Do I want a motor with wide power range or peak power? There are many factors that come into play when choosing pistons. Once you have decided, you can assume that a engine with forced induction should have a set of pistons with slightly lower compression than an engine without a turbo/supercharger. The reason for that is that if you were to push the fuel/air mixture into a cylinder where the compression is too high, the engine will stall. It will ultimately lead to a broken motor. On the other hand, if you run on ethanol, you can have a slightly higher comp. without it spiking as ethanol is more resistant to knocking (higher octane number).

    As said, there is a lot to think about, but if you have the slightest doubt, don't hesitate to contact us and we will help!

  • Accessories & Spare Parts
  • Guarantee
  • Reviews:
  • To leave a review, you should have previously purchased this product and to your customer profile.

Last viewed products

Fast delivery
Audi A6 Sedan Typ 4B (C5), 2WD 06/97>04 Sport Springs 40mm h&r
H&R Audi A6 Sedan Typ 4B (C5), 2WD 06/97>04 Sport Springs 40mm h&r
Sport Spring kits are H&R’s number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling.
327 EUR
Buy!
2-4 business days

Recommended for you

Fast delivery
Subaru Outback 05-08 4-Cyl. 2.5l Timing Belt Component Kit Gates Racing
Gates RACING Subaru Outback 05-08 4-Cyl. 2.5l Timing Belt Component Kit Gates Racing
Timing belt driven water pumps should always be replaced at the same time as the timing belt. Gates Racing kits include High Performance Timing Belts, pulleys and tensioners as well as a water pump. With Gates TCKWPs, all critical system components can be replaced at the same time
949 EUR
Buy!
2-4 business days
Fast delivery
New
CNC Battery Tie-Down for Subaru Mishimoto
Mishimoto CNC Battery Tie-Down for Subaru Mishimoto
Stylish and durable CNC-machined aluminum battery tie-down for Subaru. Available in multiple anodized finishes with nylon washers. Backed by Mishimoto Lifetime Warranty.
From 97 EUR
2-4 business days
Login / Retailer
Enter your username and password below:
Username
Password
Choose country