CSF 14-18 Subaru Forester High-Performance All-Aluminum Radiator
Talk to an expert
Need help? Check fitment, get personalized recommendations and tips.
- Product description
-
The 2-Row 42mm aluminum core not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF's Exclusive B-Tube Technology increases the heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. Efficiency is key in off-roading as speeds tend to be lower overall so you end up relying on the fans to move most of the air over the radiator. While the factory fans do a decent job pulling air through the radiator core, it is still less airflow than you'd typically see in city driving. A larger and more efficient core will keep your engine temps in check and keep your engine running strong. Additionally, the end tanks are made from high grade aluminum and TIG welded to the core for extra strength. In contrast, the OEM crimped onto plastic end tank design is much weaker and creates a weak point where failure is more likely. Because the CSF radiator is designed as a true plug-and-play drop-in fit application, installation requires absolutely no modifications, trimming, or cutting. Product video
Technical specification
Article nr: csf7209Manufacture Partnumber: 7209 - Suitable for
- Brand
-
CSF manufactures the most efficient and advanced cell packs for coolers in the entire industry. It is a status gained through its innovative Tube & Fin-Technology and market-leading tests in terms of cooling and flow. These technologies have made it possible for CSF to develop cooler technology throughout the market.
B-Tube Technology
Normally, O-shaped fluid channels are used. CSF, on the other hand, uses channels shaped like a B. These B-shaped tubes are very carefully shaped and then soldered together at the seam. This allows the CSF to use a thinner and lighter aluminum (which gives a better cooling effect) because the shaping makes the material stronger than when using the traditional O-shape.
This type of design on the channels increases the surface where the heat exchanges occur with approx. 15% compared to the old technology!
Highly efficient flanges
CSF uses flanges with several ventilations that are carefully lined up to maximize airflow through the cell pack. Each model of cooler is special and each specification is carefully measured and calculated and then tested in CSF's wind tunnel for the best possible cooling effect.
- Accessories & Spare Parts
- Guarantee
-