2 - Tuning Parts for Honda S2000 AP1 99-03

Crankshaft Main Bearings from King Bearings!

Clear Anodized - 33MM X 2.8MM Thread Pitch for most Honda and Acura EnginesClear Anodized.

The aFe MagnumFLOW Air Filter enhances performance for the Honda S2000 with its durable construction, washable design, and excellent dust holding capacity.

Honda S2000 Performance Aluminum Fan Shroud Kit, 2000-2009

Upper And Lower Hose Only - 1.25"" Diameter

Ultra Race Center Feed Plenum - 5.0L Volume - 90mm Inlet, 5.0 Ford T/ Body Bolt Pattern (4.25"" Square Bolt Spacing)

ARPs bolts and studs are the strongest out there! Don´t forget to change your old used OEM bolts or studs when you rebuild your engine!

K&N Typhoon® air intake systems are built for performance and show. This free-flowing mandrel-bent aluminum tube induction system was designed to fit many sport compact performance vehicles. Typhoon air intakes come with a high-flow conical air filter designed to provide increased surface area and dust capacity. Some Typhoon air intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N air intake product page for specific CARB status.

DUAL SPRING/TITANIUM RETAINER/SEAT KIT. Brian Crower - High quality engine parts for your build.

Snyggt Catback från Tanabe med 50/60mm rör och 100mm utblås

B/ D/ H/ F Series 4 BAR MAP Sensor - Pre-06 S2000 ONLY / 58 PSI of Boost. Fits B16, B17, B18, B20, D15, D16, H22, H23, F20, F22, F23.

60mm Cat-Back Exhaust System - Direct Bolt On - Dual Canister

DUAL SPRING/STEEL RETAINER KIT. Brian Crower - High quality engine parts for your build.

STAGE 2. Brian Crower - High quality engine parts for your build.

Honda S2000 Induction Hose, 2000-2005

Intake/ Exhaust cam gears with +/- 10 Degree Range.

Black Series - Manual Transmission Only - Must Use Manifold w/ Larger Opening

Silver Plenum Base Adapter - 3.5L Volume - 90mm Inlet w/ Early 5.0L Ford T/ Body Bolt Pattern (4.25"" Square Bolt Spacing)

High Pressure Radiator Cap Type B Fits Hondas, Acura, Scion, and Toyota (Excludes 88-91 Civic, Acura Integra 1990-1993, and 92-01 Preludes)

Black Anodized - Re-Use OEM Pressure Sensor, Gasket, and Internals

Steel. Brian Crower - High quality engine parts for your build.

5.5mm Intake. Brian Crower - High quality engine parts for your build.

Mishimoto Radiator Stay, Aluminum - Honda Civic, Integra, Accord, S2000

Mishimoto Radiator Stay, Black - Honda Civic, Integra, Accord, S2000

Black Series - Manual Transmission Only - Must Use Manifold w/ Larger Opening

Mishimoto Fan Switch 80 - Honda Civic, Integra, Accord, S2000

Honda S2000 Silicone Radiator Hose Kit, 2000-2009

2000-2009 Honda S2000 Thermostatic Oil Cooler Kit

Honda Oil Filler Cap, Red

Honda S2000 Performance Aluminum Radiator, 2000-2009