Tuning Parts for Honda Accord 03-07

HKS M45i Spark Plugs φ14×19mm Super Fire Racing

Forged pistons for Honda K24 med K20A/A2/A3-Topp from CP Pistons. Choose bore and compression on the site.

Forged pistons for Honda K20A/A2/A3 from CP Pistons. Choose bore and compression on the site.

Gasket from Cometic that can withstand high power and stress. A quality gasket for those looking for the absolute best!

Seat Pressure: 62 lbs at 1.975” - Open Pressure: 220 lbs at 1.100” - Coil Bind: 1.000” Must Use Skunk2 PN 312-05-0010 (Spring Bases) to Install Dual Springs in Single Spring K Series Heads

Gasket from Cometic that can withstand high power and stress. A quality gasket for those looking for the absolute best!

70mm T/ Body Opening - 76mm MAX Ported - PRB T/ Body Bolt Pattern

Ultra Race Side Feed Plenum - 3.5L Volume - 90mm Inlet, 5.0 Ford T/ Body Bolt Pattern (4.25"" Square Bolt Spacing)

Connecting rod bearing from King Bearings!

K&N Typhoon® air intake systems are built for performance and show. This free-flowing mandrel-bent aluminum tube induction system was designed to fit many sport compact performance vehicles. Typhoon air intakes come with a high-flow conical air filter designed to provide increased surface area and dust capacity. Some Typhoon air intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N air intake product page for specific CARB status.

Allows Installation of B Series Throttle Body to a Manifold Using Honda RBC Bolt Pattern - 68mm on B Series Side

Crankshaft Main Bearings from King Bearings!

fits BC2010 and BC2011 retainers. Brian Crower - High quality engine parts for your build.

A K&N replacement air filter is designed to improve vehicle performance, provide excellent engine protection and last the life of your car, truck, motorcycle, ATV and more. K&N air filters are easy to install and come with the worry-free K&N Million Mile Limited Warranty®.

Titainium Retainer w/ 7° Keeper Seat - Seat Pressure: 60 lbs at 1.600” - Open Pressure: 220 lbs at 1.100” - Coil Bind: 1.000” Must Use Skunk2 PN 312-05-0010 (Spring Bases) to Install Dual Springs in Single Spring K Series Heads - Must Use Skunk2 PN 312-05-0010 (Keepers/Locks) on 2005+ K Series Engines

Allows Installation of K Series TPS to B Series Throttle Body

Ultra Race Intake Manifold Plenum Gasket - Use Between Plenum and Plenum Base Adapter or Between Spacers

Allows Installation of PRB Pattern K Throttle Body to a Manifold Using Early Ford 5.0L Bolt Pattern - 74mm on K Series Side

A harmonic balancer contributes to greater valve train and timing efficiency, plus reduces wear of critical engine components such as main bearings, oil pump and the crankshaft itself.

Black Anodized - 33MM X 2.8MM Thread Pitch for most Honda and Acura EnginesBlack Anodized.

Exhaust Valve Guide / Set of 8

Hard Anodized - 33MM X 2.8MM Thread Pitch for most Honda and Acura EnginesHard Anodized.

Intake, 35mm head STD Head

High-Temp 16pc. Valve Stem Seal Set - Use on Intake and Exhaust

M14 x 1.5 Thread for all Honda Acura Engines - Short Magnet for Transmission/ Long Magnet for Engine

Black Series - Ultra Race Side Feed Plenum - 3.5L Volume - 90mm Inlet, 5.0 Ford T/ Body Bolt Pattern (4.25"" Square Bolt Spacing)

Ultra Race Intake Manifold Plenum Base Adapter Gasket - Use Between Plenum Base Adapter and Runners

Intake Valve Guide / Set of 8

A K&N replacement air filter is designed to improve vehicle performance, provide excellent engine protection and last the life of your car, truck, motorcycle, ATV and more. K&N air filters are easy to install and come with the worry-free K&N Million Mile Limited Warranty®.

Clear - Ultra Race 2.0 Liter Plenum Spacer - Includes Gaskets