CSF Porsche 911 Turbo (991)/Turbo S (991.1/991.2) Twin Intercooler Set
Talk to an expert
Need help? Check fitment, get personalized recommendations and tips.
- Product description
-
CSF's Porsche 991 Turbo intercoolers have been race-tested, logged, and fully validated by some of the world's best Porsche tuners. These intercoolers have been regarded as the ""Go-To"" option for the best performance and value available in the performance aftermarket. From first glance the increase in width from the OEM's 80mm core to the CSF's 115mm width is very apparent. Critical for vehicles running performance tunes with bolt-on modifications. Considered a mandatory upgrade for vehicles running upgraded turbo systems. The larger capacity CSF bar/plate core design can handle significantly more airflow + increased boost pressures compared to the OEM intercooler system. CSF's 100% TIG welded cast end tanks, paired with its high-efficiency bar/plate intercooler core. Compared to the OEM style tub/fin core, which is crimped onto the plastic end tanks. The weaker OEM design can crack under high boost or vibrations typical to race conditions. The design of CSF's end tanks allows for airflow to be distributed evenly throughout the entire intercooler compared to the OEM intercooler design which is much shallower. The OEM design makes it more difficult for airflow to reach the top/bottom tube sections at the ends of the intercooler. CSF's Porsche 991 Turbo intercoolers are finished with an aero-space grade, Nano-particle, heat dispersion coating that dissipates heat around 35% better than uncoated raw aluminum. The coating is applied in California, USA by an aerospace coating company who also supplies coatings for Boeing. This unique coating is a key feature to achieving world-record performance, exclusively available from CSF. Product video
Technical specification
Article nr: csf8112Manufacture Partnumber: 8112 - Suitable for
- Porsche 991 Turbo / Turbo S
- Brand
-
CSF manufactures the most efficient and advanced cell packs for coolers in the entire industry. It is a status gained through its innovative Tube & Fin-Technology and market-leading tests in terms of cooling and flow. These technologies have made it possible for CSF to develop cooler technology throughout the market.
B-Tube Technology
Normally, O-shaped fluid channels are used. CSF, on the other hand, uses channels shaped like a B. These B-shaped tubes are very carefully shaped and then soldered together at the seam. This allows the CSF to use a thinner and lighter aluminum (which gives a better cooling effect) because the shaping makes the material stronger than when using the traditional O-shape.
This type of design on the channels increases the surface where the heat exchanges occur with approx. 15% compared to the old technology!
Highly efficient flanges
CSF uses flanges with several ventilations that are carefully lined up to maximize airflow through the cell pack. Each model of cooler is special and each specification is carefully measured and calculated and then tested in CSF's wind tunnel for the best possible cooling effect.
- Accessories & Spare Parts
- Guarantee
-