New
+
Horsepower
+
Newton meter
CSF Radiators

CSF BMW G8X M3/M4 High Performance Front Mount Heat Exchanger

Article nr:
csf8215
|
The CSF #8215 Cooling product is designed to be a ""Drop-In Fit"" application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.
 
908 EUR
Add to cart
Delivery:  2-4 business days
Sales Representative Image

Talk to an expert

Need help? Check fitment, get personalized recommendations and tips.

Contact us

  • Product description
  • The CSF Heat Exchanger features a 2-Row (vs OEM single row) Core that is 42mm thick with CSF's Exclusive B-Tube Technology. Increasing the size of the core and end tanks adds to the overall volume of the system which helps absorb more heat. The more efficient core not only helps dissipate more heat from the system, but also provides better airflow into the radiator that sits behind the heat exchanger. For vehicles equipped with the ZF8 Automatic Transmission, the heat exchanger core specifications were design concurrently with CSF's new Race-Spec Dual Core Transmission Oil Cooler (CSF #8221). The two included Black Rock Guards offer full protection for the heat exchanger (above and below the crash bar), especially when paired with aftermarket ""open face"" race style grilles. These grilles have become quite popular for performance and aesthetics, and keeping your heat exchanger safe from debris is very important. With well over 100 track hours worth of testing and thousands of miles on the road, you can be assured that the CSF's new High-Performance Front Mount Heat Exchanger has been thoroughly tested and vetted.

    Product video

    Technical specification

    Article nr:
    csf8215
    Manufacture Partnumber: 8215
  • Suitable for
  • Brand
  • CSF Radiators

    CSF manufactures the most efficient and advanced cell packs for coolers in the entire industry. It is a status gained through its innovative Tube & Fin-Technology and market-leading tests in terms of cooling and flow. These technologies have made it possible for CSF to develop cooler technology throughout the market.

    B-Tube Technology

    Normally, O-shaped fluid channels are used. CSF, on the other hand, uses channels shaped like a B. These B-shaped tubes are very carefully shaped and then soldered together at the seam. This allows the CSF to use a thinner and lighter aluminum (which gives a better cooling effect) because the shaping makes the material stronger than when using the traditional O-shape.

    This type of design on the channels increases the surface where the heat exchanges occur with approx. 15% compared to the old technology!

    Highly efficient flanges

    CSF uses flanges with several ventilations that are carefully lined up to maximize airflow through the cell pack. Each model of cooler is special and each specification is carefully measured and calculated and then tested in CSF's wind tunnel for the best possible cooling effect.

  • Accessories & Spare Parts
  • Guarantee

Reviews and questions

Last viewed products

Recommended for you

Login / Retailer
Enter your username and password below:
Username
Password
Choose country