CSF 07-13 BMW M3 (E9X) High Performance Power Steering Cooler
Talk to an expert
Need help? Check fitment, get personalized recommendations and tips.
- Product description
-
The engineers at CSF know cooling. So when it comes to keeping your power steering fluid temps in check as you push your E9X M3 hard on the street or track, the CSF PS Cooler is the obvious choice. While often overlooked, your power steering system can become quite annoying if it overheats. As power steering fluid boils it gets bubbles in the system leading to sloppy steering response and a noisy pump. On top of that, you will need to replace your power steering fluid if you let it overheat which is both annoying and an added cost. Product video
Technical specification
Article nr: csf8041Manufacture Partnumber: 8041 - Suitable for
- BMW E8x / E9x inkl M3
- Brand
-
CSF manufactures the most efficient and advanced cell packs for coolers in the entire industry. It is a status gained through its innovative Tube & Fin-Technology and market-leading tests in terms of cooling and flow. These technologies have made it possible for CSF to develop cooler technology throughout the market.
B-Tube Technology
Normally, O-shaped fluid channels are used. CSF, on the other hand, uses channels shaped like a B. These B-shaped tubes are very carefully shaped and then soldered together at the seam. This allows the CSF to use a thinner and lighter aluminum (which gives a better cooling effect) because the shaping makes the material stronger than when using the traditional O-shape.
This type of design on the channels increases the surface where the heat exchanges occur with approx. 15% compared to the old technology!
Highly efficient flanges
CSF uses flanges with several ventilations that are carefully lined up to maximize airflow through the cell pack. Each model of cooler is special and each specification is carefully measured and calculated and then tested in CSF's wind tunnel for the best possible cooling effect.
- Accessories & Spare Parts
- Guarantee
-