Braided Heat Shrink Protection Sleeve, ID34mm is the perfect protection for your electrical wires and corrugated hoses that do not come with a protection layer pre-applied.
The heat shrink protection sleeve is meant to be used with the BQL system from Nuke Performance. The sleeve has an internal diameter of 34mm and shrinks down to 15mm making it ideal for many different applications.
• Maximum internal diameter : 34mm (1.34")
• Minimal internal diameter : 15mm (0.59")
• Stays flexible even when fully shrinked
• Extremely durable thanks to its woven design
• Delivered in pre-cut 1, 2, 4, and 6m lengths
Protect your BQL corrugated hose in your crankcase / oil catch can kit installation against wear. Protect your electrical wires or your non-pre-braided fuel hoses and much more with the high-quality heat shrink protection sleeve from Nuke Performance.
Easy to secure to its location with the Nuke Performance heat shrink sleeves (available here) that are available in several different internal diameters.
Heat Shrink Sleeves for BQL corrugated hoses, 10pcs Part # : 290-01-102
Heat Shrink Sleeves for AN-4 to AN-8 fuel hoses, 10pcs Part # : 810-23-118
Heat Shrink Sleeves for AN-10 to AN-12 fuel hoses, 10pcs Part # : 810-23-128
• Braided Heat Shrink Protection Sleeve, ID34mm Specification :
For more information about the product, contact us directly.
| Material | Polyethylene terephthalate (PET) |
| Temperature range | -40°C to 150°C (-40°F to 302°F) |
| Maximum inner diameter | 34mm (1.34") |
| Minimum inner diameter | 15mm (0.59") |
| Length | Pre-cut 1m (3.28ft) # 290-01-201Pre-cut 2m (6.56ft) # 290-01-202Pre-cut 4m (13.12ft) # 290-01-204Pre-cut 6m (19.69ft) # 290-01-206 |
| Resistance | Wear-resistantWeather-resistantChemical-resistant |
| For motorsports use | YES |
| Color | Black |
