Choose your weapon:
- A sophisticated Touring Edition Axle-back Exhaust.
- Touring Edition Axle-back features AWE Tuning’s proprietary drone-canceling solution, 180 Technology®
- Performance Mid Pipes available for racing applications
- Max gains of 13 hp and 13 ft-lbs of torque at the crank (328i)
- Fitments for B48 (330i), and N20 and N26 motors (328i)
- Handcrafted from 3” U.S.-sourced CNC mandrel-bent T304 stainless steel
- 80mm double-walled tips available in chrome silver or diamond black
- Available as dual tip (330i, 328i) or unique quad tip configuration (328i)
- 3D-printed bolt on marking template allows for perfect “quad tip” bumper cut if desired (available for both Non-M Sport and M Sport 328i cars)
- Direct bolt-on for factory-like simplicity
- Engineered, designed and manufactured in-house at AWE Tuning
- Perfect fitment - guaranteed
- No Check Engine Light - Guaranteed
- Featuring the AWE Tuning Lifetime Exhaust Warranty
The options:
The AWE Tuning BMW F3X 2.0T Exhaust Suite is available as follows:
The AWE Tuning ® 328i / 330i Touring Edition Axle-back Exhaust
The AWE Tuning ® Touring Edition Axle-back Exhaust is straight-through axle back system available as dual outlet (single side, two tips) for the 328i / 330i, or quad outlet (two tips on each side) for the 328i, and leverages AWE Tuning’s proprietary drone-cancelling solution, 180 Technology® , to produce the perfect, drone-free exhaust note.
Sound Perfection: AWE Tuning 180 Technology®
Perfect tone comes compliments of AWE Tuning 180 Technology®.
As exhaust gases exit the N20/26 and B48 engines and flow into an AWE Tuning 180 Technology® -equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.
Tip options:
All F3X 328i systems are 80mm and double walled, available in either chrome silver or diamond black.
AWE Tuning 328i / 330i Performance Mid Pipes
With the Resonated Performance Mid Pipe in place, the Touring Edition Axle-back is transformed into a full downpipe-back system, replacing the factory mid section (and the secondary catalytic converter on 328i N26 motors) with straight-through 3” T304L stainless steel tubing.
Please Note: The AWE Tuning Performance Midpipes for BMW 330i and for 328i cars with the N26 motor are for racing use only.
Some fitments depend upon N20 vs N26 motor type, so be sure to check our simple N20 vs N26 guide to verify motor type.
What’s in the box?
Depending on configuration, the Touring Edition Axle-back Exhaust or Performance Mid Pipe, exhaust tips (two or four), and all clamps and hardware required for installation.
IMPORTANT NOTES ABOUT THESE PRODUCTS:
- Quad tip configurations are only available for the 328i
- If you are opting for the quad tip option, be sure to also purchase the marking template.
We are in the business of performance.
AWE Tuning has one vision: To Unlock Performance. From award-winning handcrafted performance exhausts to track-tested carbon fiber intakes and performance intercoolers, AWE Tuning innovates, designs, manufactures, retails and distributes AWE Tuning brand performance products globally through its preferred network of dealers, online and from its state-of-the-art headquarters outside of Philadelphia, Pennsylvania. Since 1991, AWE Tunings elite team of researchers, engineers, innovators and drivers have track-tested and introduced premium performance upgrades for some of the finest automobiles in the world.
The in-house advantage.
A recent carbon fiber intake had over 350 in-house hours of development and testing behind it. Needless to say, our people are fanatically committed to the business of performance. By controlling every facet of development we are able to guarantee effectiveness and quality like no other.
Our laboratory is as much our CAD tools as it is our CNC machine as it is our official-tuner-status at New Jersey Motorsports Park. It’s all part of our DNA, from prototyping to manufacturing to testing. The bottom line, in-house means in control – and that’s where you want to be.
Our vision
Put simply, our company culture revolves around one vision: To Unlock Performance. You have it in there... its just about unlocking it. With every CAD rendering and every test run, we ask ourselves, "Can this be better? Can we unlock more performance?" Whether were choosing the next intercooler design or fabricating one of our signature 180 Technology® exhausts, we are fanatics and enthusiasts, committed to performance, all without ever sacrificing any of the practicality that youve come to rely on.
In other words, our mission is to become the most trusted partner in precision automotive engineering for enthusiasts like you.
