Torque Solutions

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount ( Black )

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

24 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

24 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount w/ Insert

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

30 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount Combo w/ Inserts (Silver)

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

58 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount (Gold)

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

24 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9Radiator Mount w/ Insert (Gold)

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

30 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount Combo w/ Inserts (Gold)

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

58 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount (Purple)

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

24 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount w/ Insert (Purple)

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

30 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount Combo w/ Inserts (Purple)

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

58 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount (Blue)

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

24 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 7/8/9 Radiator Mount w/ Insert (Blue)

Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job.Priced Individually.

30 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO VII-IX 2001-2006 Billet Aluminum 4 Piece Engine Mount Kit

These mounts are made out of high grade billet aluminum material and steel. The mounts feature 70 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking.

723 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO VII-IX Billet 3 piece mount Kit

These mounts are made out of high grade billet aluminum material and steel. The mounts feature 70 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking.

593 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO VII-IX Billet 3 piece mount Kit

These mounts are made out of high grade billet aluminum material and steel. The mounts feature 70 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking.

593 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions EVO 92-14 Drive Shaft Single Carrier Bearing Support Bushings

Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with billet aluminum pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.Ts. The mounts keep the propeller shaft from moving under hard acceleration, stopping and turning giving you optimal performance 100% of the time out of your vehicle.

43 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions EVO VII-IX 01-06 (Non Ayc) Billet Rear Differential Mount Inserts

Solid Polyurethane bushings are much harder compared to the OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber.

124 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 8/9/X MR / Lancer Ralliart SST Fat Head Shift Knob (Black)

Torque Solution billet shift knobs are machined from 6061 Billet material and hard anodized to resist scratching and wear. Each knob weighs 188g / 6.6oz to give you that more positive & smooth feel when shifting. Suitable for all forms of racing and guaranteed to last a lifetime.

63 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 8/9/X MR / Lancer Ralliart SST Fat Head Shift Knob (Blue)

Torque Solution billet shift knobs are machined from 6061 Billet material and hard anodized to resist scratching and wear. Each knob weighs 188g / 6.6oz to give you that more positive & smooth feel when shifting. Suitable for all forms of racing and guaranteed to last a lifetime.

63 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 8/9/X MR / Lancer Ralliart SST Fat Head Shift Knob (Purple)

Torque Solution billet shift knobs are machined from 6061 Billet material and hard anodized to resist scratching and wear. Each knob weighs 188g / 6.6oz to give you that more positive & smooth feel when shifting. Suitable for all forms of racing and guaranteed to last a lifetime.

63 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 8/9/X MR / Lancer Ralliart SST Fat Head Shift Knob (Red)

Torque Solution billet shift knobs are machined from 6061 Billet material and hard anodized to resist scratching and wear. Each knob weighs 188g / 6.6oz to give you that more positive & smooth feel when shifting. Suitable for all forms of racing and guaranteed to last a lifetime.

63 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO 8/9 MR / Evo X MR / Lancer Ralliart SST Fat Head Shift Knob (Silver)

Torque Solution billet shift knobs are machined from 6061 Billet material and hard anodized to resist scratching and wear. Each knob weighs 188g / 6.6oz to give you that more positive & smooth feel when shifting. Suitable for all forms of racing and guaranteed to last a lifetime.

63 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO X MR & GSR 08-15 Solid Differential Side Inserts

Torque Solution delivers premium aftermarket car parts at great prices, with clear fitment details and photos for the perfect upgrade.

140 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO X 2008-2014 Clutch Master Cylinder Reinforcement Ring

We have found that the plastic master cylinder in the EVO X can break into two pieces under even regular driving conditions. This ring goes around the master cylinder and clamps it tightly together to reduce the risk of future failure.

32 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO X 2008-14 Engine Mount Inserts

These are Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM Caliber engine mounts. Made from 60 durometer polyurethane. Each mount includes 2 halfs and a center steel sleeve. Bushings come with a lifetime warranty through Torque Solution.

97 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO X 2008-2014 Engine Mount Inserts

These are Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM Caliber engine mounts. Made from 60 durometer polyurethane. Each mount includes 2 halfs and a center steel sleeve. Bushings come with a lifetime warranty through Torque Solution.

181 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO X 2008-2014 Side Mount Inserts & Billet Front Engine Mount Combo

These are Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM Caliber engine mounts. Made from 60 durometer polyurethane. Each mount includes 2 halfs and a center steel sleeve. Bushings come with a lifetime warranty through Torque Solution.

336 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO X 2008-2014 Billet Rear Mount Insert

These mounts are made out of high grade billet aluminum material and steel. The mounts feature 70 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking.

49 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Mitsubishi EVO X 2008-2014 Side / Rear Mount Inserts & Billet Front Engine Mount Combo

These are Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM Caliber engine mounts. Made from 60 durometer polyurethane. Each mount includes 2 halfs and a center steel sleeve. Bushings come with a lifetime warranty through Torque Solution.

387 EUR

Lägg i bevakningslistan

Out of stock

Torque Solutions Subaru BRZ / Scion FR-S 2013+ Rear Subframe Bushings Torque Solution

Upgrade you chassie with these subframe bushings.

101 EUR

Lägg i bevakningslistan

Out of stock