STREETEC comp1 EVO Black
We recommend
Pressure Switch for Compressor - Airworx Suspension
110–145 psi (8.3–10.3 bar)
Talk to an expert
Need help? Check fitment, get personalized recommendations and tips.
- Product description
-
STREETEC comp1 EVO piston compressor black incl. antivibration kit
- Pistoncompressor 12 V
- Duty Cycle: 100% @ 100 PSI
- Flowrate: 1,76 CFM (cubik per minute)
- maximum 200 PSI = 13,8 bar
- Fuse: 40A (not included)
- L / B / H = ca. 27,5cm / 10,5cm / 17 cm
- black 1/4-stainless steel leader lines with check valves
To ensure a problem-free operation of the compressor, the following points must be checked:
- The compressor may only be operated with a 40A fuse! A higher or lower amperage of the fuse is not permissible.
- If you install multiple compressors, each compressor needs its own fuse.
- The compressor may only be installed and operate in the water and heat protected areas.
- The compressor is a dry rotor and therefore does not require any lubrication oil.
- The compressor may only be operated with a fully functional and fully charged vehicle battery, otherwise the coil of the compressor may be damaged by the high starting current (if the voltage is too low).
- Ensure sufficient attachment and conductivity of the ground cable from the compressor to the body.
- Always ensure sufficient fresh air supply.
Product video
Technical specification
Article nr: comp1_evo_blackManufacture Partnumber: comp1_evo_black - Suitable for
- Universal
- Brand
-
Streetec Suspension is a brand within Null-Bar which is a German company specializing in air suspension. In addition to being a general agent for several well-known brands, there are also in-house developed products such as air bellows, management systems, strut kits, compressors and other components.
- Accessories & Spare Parts
- Guarantee
-
- Reviews:
-
To leave a review, you should have previously purchased this product and log in to your customer profile.